XZM Series Ultrafine Mill

Zenith XZM Series Ultrafine Mill is widely for micron powder producing .The output size can reach 2500mesh (5um) .It is suitable to grind the material with middle and low hardness, moisture below 6%, and the material should be non-explosive and non-flammable, such as: calcite, chalk, limestone, dolomite, kaolin, bentonite, steatite, mica, magnetite, iolite, pyrophillite, vermiculite, meerschaum, attapulgite, diatomite, barite, gypsum, alunite, graphite, fluorite, phosphate ore, potassium ore pumice, etc. The size of the finished product can be adjusted between 325-2500 mesh.

Features :

1. High capacity and low consumption.
2. Advanced grinding cavity design.
3. High quality grinding media.
4. Advanced intelligent speed control device.
5. Large range of fineness adjusting.

Technical data :

Tab 1:
item	XZM215	XZM221	XZM227
Number of roller(piece)	15	21	27
Ring diameter(mm)	Φ600	Φ800	Φ1000
Number of ring (piece)	3	3	3
main equipment rotate speed（r/min）	235	235	235
Max. feed size（mm）	≤10	≤10	≤10
Final size (mesh)	325－2500	325-2500	325-2500
Capacity（kg/h）	350-2500	600－4000	900－6000
Overall size（m）	10×2×5.5	12.4×2.5×6.3	18.2×4.7×8.6
Classifier Frequency modulation motor Power (kW)	11	18.5	37
Motor of blower Power(kW)	30	45	75
Note: If there is any change of above specification, it is all according to the booklet with machine.

Tab 2:
Basic data	Item	Unit	specification
			XZM215	XZM221	XZM227
Motor of main machine	Model	-	Y225S-4	Y250M-4	Y2-315-6
	Power	kw	37	55	110
Speed-adjustable motor	Model	-	Y160M-4	Y180M-4	Y2VP200L-4
	Power	kw	11	18.5	30
Motor of elevator	Model	-	Y100L-4	Y100L-4	Y100L-4
	Power	kw	3	3	3
Motor of blower	Model	-	Y200L1-2	Y225M-2	Y280M-2
	Power	kw	30	45	90
Hammer crusher	Model	-	250*400	250*400	250*400
	Power	kw	15	15	15
Electromagnetic Vibrating feeder	Model	-	GZ1F	GZ1F	GZIF
	Power	kw	0.06	0.06	0.06
Discharge valve	Model	-	ZJD-1：40	ZJD-1：40	ZJD-1：40
	Power	kw	0.75	0.75	0.75
Pulse deduster	Model	-	DMC72-II	DMC120-II	DMC184-II
	Power	kw	5.5	7.5	Y-160L-4-15
Note: If there is any change of above specification, it is all according to the booklet with machine.